Low output

- Output height: 35 cm
- Output direction: rear

The low output is used for shredding large volumes of soft material with a high moisture content, such as grasses, hedge clippings or plant debris.

A grid is optionally available for an extra fine result that composts even faster.

Chipping system

The chipping system consists of a metal drum (rotor) on which two PRO-blades are mounted that rotate along the counter blade on a high speed. Branches are automatically pulled inside and effortlessly processed into beautiful sized, fine wood chips.

The PRO-blades are made of a special metal alloy and last twice as long as normal blades. The blades have two cutting edges and can be turned around when one side is worn out. When both sides are worn out, you can have the blades sharpened or replaced. Always have this done by an expert.

High output

- Output height: 138 cm
- Output direction: side
- Deflector: infinitely adjustable up to 85°

The high output is used for shredding branches up to Ø 10 cm (dead wood up to Ø 8 cm).

The output can be positioned to the left or right. Set the desired direction with the adjustable deflector and blow the wood chips directly into a wheelbarrow or trailer.

Soft and dry materials, such as leaves, can also be processed with the high output configuration as long as it is fed together with branches.

A turnable output is optionally available for more variations to output directions.

Frame

A robust and durable frame ensures that the GTS1300C is perfectly balanced. Because of the compact dimensions, the GTS1300C can be easily transported in a van or on a trailer.

Engine Mitsubishi GB40

- Output: 13 hp / 9.6 kW
- Cylinder capacity: 391 cc
- Rotation speed: 3600 rpm
- Starter: recoil start
- Tank capacity: 6 l
- Oil sensor: no
- Fuel: Euro98 (E5)

The Mitsubishi GB40 is the strongest in its segment. Mitsubishi engines are quieter, use less fuel and oil and vibrate less than any other engine.

Panic bar

As a safety feature the input is equipped with a panic bar. When the panic bar is used the engine is directly stopped.

Input

- Input dimensions: 50 x 35 cm
- Input height: 103 cm

The input guides branches and other green waste to the chipping system. The working height of 103 cm makes the input very accessible. Together with the wide opening, a high working speed is ensured.

The rubber flaps in the input prevent chipped material from being thrown back to the user.